Frequently Asked Questions - Computherm Q5RF Operating Instructions Manual

Multi-zone wireless (radio-frequency) digital room thermostat
Table of Contents

Advertisement

When you think that your appliance is operating incorrectly or encounter any
problem while the appliance is being used then we recommend that you read
Frequently Asked Questions (FAQ) available on our website, where we collected
the problems and questions that most frequently occur while our appliances are
being used, along with the solutions thereto:
The vast majority of the problems encountered can be solved easily by using the
hints available on our website, without seeking professional help. If you have not
found a solution to you problem, please pay a visit to our qualified service.
Warning! The manufacturer does not assume responsibility for any direct
or indirect damages and loss of income occurring while the appliance is
being used.
PRODUCT INFORMATION DATA SHEET:
Trademark: COMPUTHERM
Model identifier: Q5RF
Temperature control class: I. class
Contribution to the efficiency of seasonal space heating: 1%
Remark:
In addition to using modern temperature regulators, the following up-to-date regulation
methods also contribute significantly to the improvement of the comfort provided by the
heating network, the energy efficiency of the heating network and the coefficient of perfor-
mance:
• By dividing the heating network into sections or zones and with their separate regulation
we can ensure that every room (zone) is heated only when it is necessary. (You can
obtain information on the establishment of the heating network and apparatuses and
fittings needed for division into zones in our publication titled "Energy Savings and
Comfort" which is also available on our website www.computherm.info).
• Using programmable thermostats you can ensure that every room (zone) is just
heated according to a timetable preset in accordance with the demands. (You can
obtain information on the services provided by COMPUTHERM Q7; Q7RF and Q8RF
programmable room thermostats on our website).
• Using modern modular heating devices equipped with an external temperature sensor
the boiler can be operated at a higher efficiency.
• Using low temperature heating networks (e.g. 60/40 °C) and condensing boilers the
temperature of the flue gas leaving the boiler can be reduced, and this way fuel efficiency
can be improved significantly.

FREQUENTLY ASKED QUESTIONS

www.computherm.info/en/faq
- 14 -

Advertisement

Table of Contents
loading

Table of Contents