Controls Description - TurboAnt V8 User Manual

Light Icon
Speed Level
Current Speed
Speed Unit
Note: If there is no operation within 10 minutes, the scooter will automatically turn off with a "beep" sound.

Controls Description

Control
Power On/Off
Throttle
Brake Lever
Speed Level
Headlight
Cruise Mode
LED Display
Operation
Press and hold on the power button for 1 second or longer to turn
on/off the scooter.
Press down the throttle to accelerate.
Squeeze the brake lever to stop the scooter. When the brake
lever is fully depressed, the scooter will come to a complete stop.
After that, it will have to be manually started (see the General
Troubleshooting and Solution Guide section).
Double press the
power button to
adjust the speed
level.
Short press the power button while the scooter is on to turn
on/off the headlight and taillight.
Maintain a constant speed that you desire (must be at least 3.7 mph
or 6 km/h to activate cruise mode). Then, hold the throttle in the
same position for six seconds to enable cruise control. Exit cruise
mode by using either the throttle or brake lever.
Cruise Control Icon
Mph Km/h
Level 1: shows the number "1"
Level 2: shows the number "2"
Level 3: shows the number "3"
06
Battery Status