Electrical Characteristics; Silence (Optional); Eco Function; Electrical Energy Consumption Control Function - Fisher FSAIF-CP-91AE3 Technical Manual

as 8°C, preventing the indoor area from freezing if
unoccupied during severe cold weather.
1.15 Silence
Press "Silence" on the remote control to enable the
SILENCE function. While this function is active, the indoor
unit will run at faint breeze(1% fan speed), which reduces
noise to the lowest possible level.

1.16 ECO function

• Used to enter the energy efficient mode.
• Under cooling mode, press ECO button, the remote
controller will adjust the temperature automatically
to 24°C, fan speed of Auto to save energy (but only
if the set temperature is less than 24°C). If the set
temperature is more than 24°C and 30°C, press the
ECO button, the fan speed will change to Auto, the
set temperature will remain unchanged.
• When AC receives signals, such as switch off, Turbo
operation , Silence operation , Self clean operation
, Forced cooling operation, mode setting, Sleeping
mode, or adjusting the set temperature to less than
24°C,it will quit the ECO operation.
• Operation time in ECO mode is 8 hours. After 8 hours
the AC quits this mode.
• When there's any one temperature sensor in
malfunction, the AC will quit ECO mode .
• Indoor fan will run at auto fan when enter into the
ECO mode .The setting temperature and setting fan
speed can be changed through remote controller
signal.
1.17 Electrical energy consumption control
function
(in cooling mode)
Press the "Gear" button on remote controller to enter the
energy efficient mode in a sequence of following:
Turn off the unit or activate ECO, sleep, Super cool, Silence
or self clean function will quit this function.

1.18 Breeze Away function

• This feature avoids direct airflow blowing on the body
and makes you feel indulging in silky coolness.
• NOTE: This feature is available under cooling mode,
fan-only mode and drying mode.

1.19 Active Clean function

• The Active Clean Technology washes away dust,
mold, and grease that may cause odors when it
adheres to the heat exchanger by automatically
freezing and then rapidly thawing the frost. The
internal wind wheel then keeps operating to blow-dry
the evaporator, thus preventing the growth of mold
and keeping the inside clean.
• When this function is turned on, the indoor unit
display window appears "CL", after 20 to 45 minutes,
the unit will turn off automatically and cancel Active
Clean function.
1.20 Wireless Control (Optional)
• Wireless control allows you to control your air
conditioner using your mobile phone and a Wireless
connection.
• For the USB device access, replacement, maintenance
operations must be carried out by professional staff.
 Page 33 