Advertisement
Service Information
10. Verify that the pre-configured 5054A and its serial number recorded in Step 2 is listed in the Selection
list for interface window. Also ensure that the VAS 5054A appears listed with a checkmark (
being Active. If a checkmark does not appear, check the VAS 5054A entry manually before enabling:
11. Select / highlight the VAS 5054A in the selection list. Then click Update to enable the transmitter head.
Click End to close the VCI-Manager interface.
12. From the Windows desktop, start the VAS-PC application.
13. Launch Vehicle Self Diagnosis or other VAS-PC function and ensure device-to-vehicle
communication, for example: Check DTC Memory.
14. Close the VAS-PC and return to the Windows desktop.
15. Restart the tablet (Start > Shut down > Restart).
© 2013 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Page 21 of 22
) as
Advertisement
