Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for dogPacer 4.0
Summary of Contents for dogPacer 4.0
- Page 1 For latest info, tips, and photos go online to: www.dogpacer.com...
- Page 2 Congratulations! You have taken the first step in your dog’s health, happiness, and a better life! We encourage you to go online to: www.dogPACER.com to see other dog owners running their dogs and to join our Facebook community for special offers and information.
- Page 3 1. Protect your floors Place a mat, rug or carpet under the dogPACER in order to protect your floor 2. Unfold the dogPACER Lay the treadmill on the power switch side and unfold it. (For further info check videos on www.dogpacer.com).
- Page 4 4. Connecting the Overhead Bar overhead bar Put the into place and tighten the 4 screws (Bolts M6*15). The upper part can come off, if your dog is too tall. (NOTE：Please insert all the screws initially and tighten one by one using the 5mm Hex Key. Do not over tighten.)
-
Page 5: Connect The Computer
● Connect the computer to the treadmill with two screws (M6*15 bolts). Attaching the Side Panels 1. When the dogPACER is in position, lay the side panel down on the belt. 2. Insert the side panel to the rubber clips (A, B & C) on the P.V.C. side rails. - Page 6 7. Applying Tension to the Belt ● When the belt is loose, starting at the front side and going back, center the belt using your hands. ● After you make sure the belt is centered, start turning the adjustment knobs together.
- Page 7 8. Connecting your dogPACER Connect the power cable to the machine and an outlet. Make sure the Safety Key is in its place. Turn the switch to ON mode (amber light). Computer console...
- Page 8 ● Start the treadmill by pushing the start/stop button. ● At minimum speed, go to the back of the dogPACER and see if the running belt stays in the middle. If it shifts to the right or left do the following: 10.
-
Page 9: Warranty
Incline Feature The dogPACER contains 4 manual incline positions from 5 degrees to 9 degrees Pre-set programs For any further information, troubleshooting, or help please see dogPACER user manual or go online to : www.dogpacer.com Each pre-set program has a maximum time of 30 min per workout. It will always start at 10 min and can be adjusted per pet level. -
Page 10: Bluetooth Connection
Bluetooth Connection Thank you for purchasing our NEW dogPACER 4.0. We are so excited for you to get started using it. Please follow the steps below to get started: 1. Download the dogPACER APP from the Apple/Android store. 2. Turn the power on to your treadmill and open the app.
Need help?
Do you have a question about the 4.0 and is the answer not in the manual?
Questions and answers