Mri Safety Information - UX Platforms TESLA VISION UX-PS-K-001 User Manual

Mri bore projection system
Table of Contents

Advertisement

REPORTING INCIDENTS
Contact the manufacturer immediately to report an incident and/or injury to a patient, operator
or maintenance employee that occurred while using the Tesla Vision system and do not operate
the equipment until an investigation is conducted.
EMERGENCY PROCEDURE
In the unlikely event that either the Tesla Vision system or any component of the system creates
smoke, sparks, or if the patient requires emergency assistance:
- Stop the scan if one is in progress.
- Remove patient from the MRI Room.
- Power down the projector system, if possible, by locating the power block located in the
computer room and disconnecting it from the wall outlet.

MRI SAFETY INFORMATION

Shown below are the MRI safety indicators for all parts included in the Tesla vision system.
These ratings will be displayed next to each component listed in this user manual for your
reference.
4
MR Safe: The device is completely nonmagnetic, non-electrically conductive
and non-radio frequency reactive, therefore eliminating all primary and
potential risks during MRI scanning.
MR Conditional: The device may contain magnetic, electrically conductive
or radio frequency-reactive components that are safe for operation in
proximity to the MRI, provided the conditions for safe operation are defined
and observed (both for the MRI scanner and the device itself).
MR Unsafe: Objects that are significantly ferromagnetic and pose a clear
and direct threat to persons and equipment within the magnet room.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tesla vision ux-ps-k-002

Table of Contents