Table of Contents
Advertisement
SPECIFICATIONS
The electrical components of this device are not user serviceable. Any con-
tact with the wiring or other electrical components by untrained persons
may result in serious injury or death.
Component Weight
Tesla Projector
Rolling Mount Assembly
Wi-Fi / Power Box
Video Control Unit
Power Block
BNC Cable
Mirror Arch Display
Component Dimensions
Tesla Projector
Rolling Mount Assembly
Wi-Fi / Power Box
Video Control Unit
Power Block
BNC Cable
Mirror Arch Display
Power Supply / Electrical Specifications
Parameter
Input Voltage
Output Voltage
Projector Unit Power Specs / Electrical Specifications
Parameter
Input Voltage
Portable and mobile RF communications equipment should be used no closer to any part of
the Tesla Vision system, including cables, than the recommended separation distance calculat-
ed from the equation applicable to the frequency of the transmitter.
Recommended separation distance
d=1.2√P - 80MHz to 800 MHz
d=2.3√P - 800MHz to 2.7 GHz
Where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer and d is the recommended separation distance in meters (m).
Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey, a)
should be less than the compliance level in each frequency range. b)
Interference may occur in the vicinity of equipment marked with the following symbol:
3.5 lbs
20 lbs
7 lbs
1.1 lbs
2 lbs
2 lbs
3.8 lbs
8" L x 4" W x 3" H
2' 0.5" L x 1' W x 5' 0.9" H
3"W x 5"H x 8"L
12" L x 6" W x 1.25" H
6.5" L x 3.5" W x 1.25" H
45' L
17.3" L x 18" W x 13" H
Rating
90 ~ 264 VAC 50-60Hz
12V DC 5A
Rating
9-15V DC 4A max
17
Advertisement
Table of Contents
