Table of Contents
Advertisement
INSTRUCTIONS
Moving/Storing the Projector System
1.
Unlocking the rolling mount
Hold pillar here
2.
Locking the rolling mount
1
2
12
Floor Mount Bracket
CAUTION: The projector unit must
be powered OFF before moving it
throughout the MRI room. If powered
ON while moving it through the
magnetic field you will induce currents
and possibly damage the device.
To move the system, simply grab the
Main Adjustment Pillar and fully pull
it back from the Floor Mount Bracket.
After it's released, you can move the
device freely throughout the MRI room.
CAUTION: The system can become
unstable if it is not locked into the Floor
Mount Bracket.
Take the Rolling Mount Assembly and
align the black arrow to the adjacent
slot guide located on the Floor Mount
Bracket.
1. Press the Rolling Mount Assembly
into the slot on the Floor Mount Bracket.
2. You will hear an audible click once
locked. When you see the green tab
on the Floor Mount Bracket in the
locking view-port on the Rolling Mount
Assembly, the Rolling Mount Assembly
is fully secured.
Advertisement
Table of Contents
