Tni_Line_Buildout - Bay Networks 5391 Getting Started Manual

Chapter 2 Commands and Parameters
T1 Getting Started Guide
2-34

tni_line_buildout

This T1 parameter sets the Line Build-Out (LBO) value. The Channel
Service Unit (CSU) portion of the T1 Network Interface requires the
administrator to configure a LBO value. The service provider will supply
a value measured in decibels (dB) based on the amount of cable loss from
the service provider's location to the Annex. Parameter settings include
0, 7.5, 15, and 22.5. The default is 0. The command display looks like this:
admin: set t1 tni_line_buildout 7.5
admin: show t1 tni_line_buildout
tni_line_buildout: 7.5
admin: