Rebooting The Host Pc; Disconnecting - Funk Software Proxy User Manual

Rebooting the Host PC

To reboot the host PC, select Reboot host from the Proxy menu, and confirm
by selecting Yes.
Proxy will send a reboot command to the host PC, and the screen will go blank.
Once the host PC has rebooted and Proxy is able to re-establish a connection, the
host PC's screen will reappear.
In order to regain control of the host PC after a reboot, the host PC must have
installed and loaded the Proxy host and be running Windows.
NOTE: PCs running the DOS version of Proxy Host require that their
AUTOEXEC.BAT contain a command to load PHOST. Unless PHOST is loaded,
Proxy will not be able to re-establish a connection.

Disconnecting

You can disconnect from the host PC you are controlling by selecting Disconnect
from the Proxy menu. The host PC will be released from your control, and the
Proxy screen will be blank.
You can also disconnect by simply closing the Proxy window. To close the
window, either:
Š
Š
The Proxy Basics
Select Exit from the Proxy menu; or
Double-click the Control Menu button.
25