Funk Software Proxy User Manual page 19

Editing a Broadcast or Scan Address
To edit an address in the Broadcast Address list:
1
2
3
4
5
To delete an address in the Broadcast Address list:
1
2
Specifying IP Station Names
In addition to its IP address, each Proxy Host station has a "station name" that is
assigned using the Host Control Panel. When Proxy polls for host PCs, it
displays their station names in a list for you to select.
You can also type an IP address or DNS name directly into the Host
workstation field, then click Connect. Proxy will attempt to establish a
connection to that IP address (or the IP address of the translated DNS name).
To connect across a router to a host PC on a different network segment, you must
provide the IP address or IP subnet mask on which the PC may be found. The IP
address/mask and the station name must be separated by a colon (:).
For example, to connect to a host PC on IP subnet 198.186.160.255 named
"George's P200," you'd specify:
If you're not sure of the IP address of a Proxy Host, you can find out by running
the Host Control Panel at the host PC; the IP address will be shown.
20 Proxy: Chapter 2
Select an entry in the list.
Click Edit.
Switch between the Broadcast to address and Scan address range, if
you wish.
Edit the Address and Description fields to your liking.
Click OK.
Select a single entry in the list.
Click Delete.
198.186.160.255:George's P200