Advertisement
With the equipment powered down and BEFORE Auto Addressing, at each header unit give the system
a unique address via SW101 and SW102.
By default switches SW101 and SW102 (4-bits per switch) are in the OFF, (X - down) position, using chart
fig 3, give each system it's own system address, starting with 1, (Factory), 2, 3 etc.
fig 17
Line (System) address chart
O = ON, X - OFF
fig 18
fig 19
-9-
Cool Designs Ltd makes every effort to ensure that the information provided within this publication is correct and error free, however we cannot guarantee that it is free of inaccuracies,
errors or omissions. Users should seek to clarify this information for themselves prior to basing any decisions upon such information.
Advertisement
