Nortel MCC3100 Planning And Engineering Manual page 52

52 Engineering
•
•
You can configure a single directory number (DN) for use with the MCC 3100
for Windows Mobile, the MCC 3100 for BlackBerry and MCC 3100 for Nokia.
However, only one client can use the DN at a time. When a second client registers
against the DN, the first client deregisters automatically.
The Direct Inward Dial (DID) number for the Dial in Service DN terminates
on the MCG 3100.
Configure the CS 1000 with a Mobility Home Location Code (HLOC) to
support the MCC 3100 for BlackBerry and MCC 3100 for Nokia. The PCA
target DN uses the HLOC as a prefix to identify mobile users. The HLOC is
a unique digit sequence that does not conflict with the CS 1000 Universal
Dialing Plan, Coordinated Dialing Plan, and routing configuration.
The Multiple Access Directory Number (MADN) contains the PCA and the
Multiple Appearance Directory Number Redirection Prime (MARP) Terminal
Number. The MARP contains the CLID and NCOS definitions. For more
information, see Features and Services Fundamentals (NN43001-106).
The CS 1000 NRS-SPS supports the Source Based Routing (SBR) feature.
The SBR feature allows the Calling Line ID (CLID), Network Class of
Service (NCOS), and dial plan for the MCG 3100 to align with the CS 1000
as the home call server. For information about Source Based Routing
(SBR), see
Nortel Mobile Communication 3100 — Planning and Engineering
Copyright © 2007, Nortel Networks
.
— Each user requires one Personal Call Assistant (PCA).
— Each PCA supports the SIP interface on the MCC 3100 for
BlackBerry or MCC 3100 for Nokia.
SIP Gateway, operating on the VxWorks Signaling Server platform
SIP Proxy Server (SPS), using the Network Routing System SIP Proxy
Server (NRS-SPS) on the Linux-based NRS.
— Configure each MCG 3100 as a Dynamic Gateway Endpoint with
an endpoint name. Configure the Dynamic Gateway Endpoint with
authentication turned off.
— Each client requires the configuration of an NRS-SPS User
Endpoint. Clients use the UE for use rname and password
information, not for SIP routing. Therefore, the NRS-SPS must never
match a destination number against the client UEs (including the
corresponding PCA Target DN).
"CS 1000 Source Based Routing" (page
Nortel Mobile Communication 3100 Series Portfolio
NN42030-200 01.09 Standard
Release 2.0 1 November 2007
ATTENTION
55).