4.
Start the engine.
Note:
If you replaced any electronic controller on the machine, you may receive a Software Version
Incompatibility fault for the replacement component. If you do receive a fault, follow the diagnostic path in
this manual for that specific fault.
5.
Run the machine and verify that all systems function safely and correctly.
6.
If any faults are reported while running the machine, follow the procedures outlined in this manual
to correct them.
Note:
If you receive the same fault that you were troubleshooting, go back to the troubleshooting step on
which you last worked. Review all previous diagnostic steps to determine a diagnostic plan. It may be
necessary to restart troubleshooting from the beginning.
21