Nortel VPN Client Release Note page 14

14 Preface
braces ({})
brackets ([ ])
ellipsis points (. . . )
italic text
plain Courier
text
separator ( > )
vertical line (
NN46110-401 01.01
Indicate required elements in syntax descriptions where
there is more than one option. You must choose only
one of the options. Do not type the braces when
entering the command.
Example: If the command syntax is
show ip {alerts|routes}
show ip alerts
Indicate optional elements in syntax descriptions. Do
not type the brackets when entering the command.
Example: If the command syntax is
show ip interfaces [-alerts]
either
show ip interfaces
show ip interfaces -alerts
Indicate that you repeat the last element of the
command as needed.
Example: If the command syntax is
ethernet/2/1 [<parameter> <value>]...
you enter
parameter-value pairs as needed.
Indicates new terms, book titles, and variables in
command syntax descriptions. Where a variable is two
or more words, the words are connected by an
underscore.
Example: If the command syntax is
show at <valid_route>, valid_route
variable and you substitute one value for it.
Indicates command syntax and system output, for
example, prompts and system messages.
Example:
Shows menu paths.
Example: Protocols > IP identifies the IP command on
the Protocols menu.
|
) Separates choices for command keywords and
arguments. Enter only one of the choices. Do not type
the vertical line when entering the command.
Example: If the command syntax is
show ip {alerts|routes}
show ip alerts
both.
or
show ip routes
and as many
ethernet/2/1
Set Trap Monitor Filters
or
show ip routes
, you must enter either
, but not both.
, you can enter
or
.
,
is one
, you enter either
, but not