Table of Contents
Advertisement
at_zone
5.
Enter an IP address for the gateway that is the next hop for
the route.
If you enter an asterisk, the RAC uses the remote address of the
port as the gateway.
6.
If necessary, you can enter a number from 1 to 15 to indicate
the number of hops to the destination, or
the route is hardwired.
You can skip this step. You do not have to enter a number of
hops or
-h
7.
Type
.
end
The at_zone attribute lists AppleTalk zones on a network. To use this
attribute:
1.
From the Bay Networks program group window, double-
click on the appropriate icon to open the acp_userinfo file.
The acp_userinfo file opens in the Notepad editor.
2.
Find the area of the file where entry information resides and
type
at_zone
3.
Enter one or more zone names.
If you use more than one zone name, separate names using
spaces (e.g.,
32 characters; you cannot use non-printable characters. If you
enter a name that contains spaces, enclose the entire name in
double quotation marks.
4.
Type
.
end
Using Remote Access Concentrator Server Tools for Windows NT
.
.
at_zone zone1 zone2
Chapter 3
Understanding Erpcd
to indicate that
-h
). Zone names can use up to
3-13
Advertisement
Table of Contents
