Bay Networks NA User Manual page 25

Native NT Security
1. If you select Native NT in the Regime radio box, the Directory
for Annex security files field becomes active. Accept the
default or enter a new destination drive and directory for the
acp_logfile file.
This field designates the drive on which you installed Remote
Access Concentrator Server Tools and the etc directory, where
the system stores the acp_dialup, acp_keys, and acp_userinfo
files.
2. If you select Native NT as your security protocol, click the
Global Group Authentication check box.
You must select this box if you want to use Windows NT global
groups to authenticate users. If you do not select it, the system
will authenticate user names and passwords only.
3. If you select Native NT and want to create a default remote
users group, click the Create Remote Users Group check box.
If you want to create a new Remote Users Group, see
Security on page
4. If you select Native NT, choose an existing domain from the
Domain field.
When you choose a domain, the groups within that domain
appear in the Groups list box.
5. If you select Native NT, choose a name from the Groups list
box.
6. Click Add to move the group(s) you select to the Remote
Access Groups list box.
The groups you add appear in the Remote Access Groups list
box preceded by their domain names. All users in these groups
will be allowed access once Windows NT domain security
authenticates them. Any users who are not members of the
groups listed here will not have access to the RACs, their ports,
or networks.
Using Remote Access Concentrator Server Tools for Windows NT
Chapter 2 Selecting Server Tools Options
2-4.
RADIUS
2-3