Advertisement
Troubleshooting Table (Continued)
Shut down the engine, remove the spark plug wire and wait 5 minutes for parts to cool before performing any maintenance
procedure or inspection on the vacuum.
S
YMPTOM
Loss of traction
Gear shift lever does not
shift
Wheels do not stop
when Wheel Drive Bail
Cable is released
Product build-up in
shredding chamber.
22
MULTI-SURFACE VACUUM
P
C
; C
OSSIBLE
AUSE
ORRECTIVE
Drive belt loose; Adjust wheel drive bail cable.
Stretched or broken drive belt; Replace belt.
Wheel drive bail cable tension spring broken; Reconnect spring or replace cable.
Malfunction in transaxle; contact us at www.MacKissic.com or call 1-800-348-1117
for assistance.
Loose gear shift lever; Check connections for loose nuts and bolts.
Broken gear shift linkage; Replace linkage.
Loose transaxle shifting arm; Tighten screw on shifting arm.
Wheel Drive Bail Cable tension spring broken, stretched, or disconnected; Reconnect spring or
cable.
Drive belt misaligned; Check that belt is properly aligned on pulleys.
Wheel Drive Cable out of adjustment; Adjust cable.
Unit just "creeps"; Shake talcum powder on drive belt.
Vacuuming too fast; Clean out shredder housing and vacuum at slower speed.
A
CTION
Advertisement
