Advertisement
DRIVING
DRIVE MODE
You can set the proper drive mode
according to the road conditions or
your driving habits.
The mode changes whenever the
driver pushes the DRIVE MODE
switch up or down.
HIGHWAY DRIVING ASSIST (HDA) (if equipped)
With the Engine Start/Stop button in the ON position, select or deselect
'Driver Assistance → Driving Convenience' from the setting menu to
activate this setting.
NOTE:
If the engine is turned off then on again, the system maintains
the last setting.
Operation :
• Driving on the highway main road.
- Vehicle speed is under 120 mph (200 km/h).
• Press the Driving Assist button on the steering wheel.
- If entering the main road of highways while SCC and LFA is
operating, HDA will be automatically activated.
If HDA is operating, the indicator on the cluster will illuminate green.
23
I Quick Reference Guide
Highway Driving Assist is designed
to help detect vehicles and lanes
ahead, and help maintain distance
from the vehicle ahead, maintain the
set speed, and help center the
vehicle between lanes while driving
on the highway.
LANE KEEPING ASSIST (LKA)
• To turn LKA on, press and hold the Lane Driving Assist button
A
• To turn LKA off, press and hold the button again.
LKA operates only when the vehicle speed is above 40 mph and when the
in the instrument cluster is green. LKA will not operate properly if the
following conditions are present:
- the lane line is not clear
- on sharp bend in a road
- heavy fog
Refer to the Owner's Manual for more detailed information.
NOTE: During operation, you may feel the sensation of steering wheel
movement. Depending on the road condition(gradient), the deflection
driving may occur.
LANE FOLLOWING ASSIST (LFA)
GENESIS ELECTRIFIED GV70
Lane Keeping Assist is designed to
help detect lane markings (or road
edges) while driving over a certain
speed. Lane Keeping Assist will warn
the driver if the vehicle leaves the lane
without using the turn signal, or will
automatically assist the driver's
steering to help prevent the vehicle
from departing the lane.
Lane Following Assist is designed to
help detect lane markings and/or
vehicles on the road, and assists the
driver's steering to help keep the
vehicle between lanes.
To activate LFA:
With the engine on, shortly press
the Lane Driving Assist button
located on the steering wheel to
turn on Lane Following Assist.
The white or green
indicator
light will illuminate on the cluster.
Press the button again to turn off.
Quick Reference Guide I
24
Advertisement
