Advertisement
7.13. When reinstalling the torsion spring, use a piece
of rope or a spring puller to pull back on the
spring to avoid the possibility of injury.
See Figure 7.13.
Figure 7.13
8.
SERVICING FRONT WHEEL BRACKETS
8.1.
In some cases the front wheel brackets may
need to be serviced. See Figure 8.1.
Figure 8.1
SERIES 569 SELF PROPELLED
8.2.
After removing the wheel bracket you will need
to take off the snap ring that holds the assembly
together. See Figure 8.2.
NOTE: The height adjustment assembly is
spring loaded by a wave washer.
8.3.
After the snap ring is remover the assembly will
come apart very easily. See Figure 8.3.
Height Index
Bracket
Bearing
Sleeve
Wave Washer
9
Figure 8.2
Height Adjustment
Lever
Wheel Axle
Flat Washer
Figure 8.3
Advertisement
