Advertisement
7.3.
Remove both wheels with a 9/16" socket.
See Figure 7.3.
Figure 7.3
NOTE: The height adjuster lever can remain on
the wheel brackets. They have been removed in
this manual for visibility purposes.
7.4.
Remove the wing nuts and hairpin clips that hold
the handle on the handle brackets.
See Figure 7.4.
Figure 7.4
7.5.
Lay the handle forward out of the work area.
Wing nut
Hairpin Clip
7
SERIES 569 SELF PROPELLED
7.6.
Remove the 2 socket head screws from the rear
on the mower using a T-80 Torx driver.
See Figure 7.6.
Socket head screws
Figure 7.6
NOTE: Lift The deck slightly to free the rear baf-
fle from the back of the deck. This will give clear-
ance to reach the flange nuts on inner deck.
7.7.
Remove both flange nuts and bolts that were
obscured behind the rear baffle.
See Figure 7.7.
9/16"
Flange nuts
Figure 7.7
Advertisement
