Table of Contents
Advertisement
The inline or activated carbon pre-filter is
exhausted.
There is foreign matter in the storage tank.
Tastes and Odors in
The product water and drain water lines are
the Product Water
reversed.
Dissolved gasses in the feed water.
Increase in product water TDS.
Air gap is blocked.
Drain Water
Overflows at the
Drain tubing is clogged.
Dispensing Faucet
Drain clamp hole is misaligned.
Excessive drain flow rate.
Faucet Leaks or
Leaks from base of the delivery tube.
Drips
Close the Feed Water Saddle Valve and relieve pressure before disconnecting any tubing or
Fitting Leaks, in
replacing any fitting. Before replacing a fitting, re–cut the tubing and re–insert into the fitting
General.
to see if that solves the leak. If pipe threads are leaking, remove and re-tape with Teflon tape.
Replace filters.
Clean, flush and sanitize the system. Replace
the filters.
See flow diagram and correct plumbing.
Pre-treat feed water to remove dissolved
gasses.
See high "High TDS in the Product Water"
section above.
Clear Air Gap.
Rinse with vinegar for removal of calcium
buildup.
Clear tubing.
Align the hole in the drainpipe.
Replace drain flow restrictor.
O-ring is bad. replace o-ring.
29
Advertisement
Table of Contents
