Advertisement
squeegee is suitable for the even surface, and the sharp-edged squeegee is suitable for the accidental surface).
5. Based on the features of the printing design, choose the mesh of appropriate density
6. Mix the ink to the appropriate chrome, if the ink is too ropy, not only has it lacked the active. But also it could jam the
mesh. If the ink is too watery, the chrome of the pattern printed will be fuzzed.
7. While printing, the ink stored on the surface of the mesh could not be too much or too less, otherwise, the mesh will be
jammed and the ink will leak, or the chrome of the pattern will be uneven.
左限位块和限位开关
Left Limited block and limited switch. Controlling the left
position of Rubber blade .
How to adjust the stroke of rubber squeegee
1) Install screen plate;
2) Loose the screw of Left side locating block and push the rubber squeegee to the left position so that the
blade can cover the beginning of design;
3) Fixture the screw;
4) Loose the screw of right side locating block and push the rubber squeegee to the right position so that the
rubber squeegee can cover full design.
5) Fixture the screw.
东莞市高宝印刷机械科技有限公司
Dongguan KC Printing Machine Limited
Website: Http://www.dg-padprinter.com
Online contact
Skype: yingsuhuakelven QQ: 726986799
Email:
cjscbsf@126.com
17-18
13592766499@VIP.163.com
右限位块和限位开关
Right
Limited
block
and
Controlling the right position of rubber blade.
limited
switch.
Advertisement
