Advertisement
15
印头气缸
Printing cylinder
16
左右气缸
Ink cover cylinder
17
回墨刮调节旋扭
Adjustment screw
18
胶刮调节旋扭
Adjustment screw
19
调节旋扭
Adjustment screw
20
锁紧旋扭
Locking screw
21
调节旋扭
Adjustment screw
22
调节旋扭
Adjustment screw
23
工作面板
Working table
七． 操作程序
Operation process
Connect the electric source
1)
2)
Our machine use one phase 220 V power supply. Some countries such as, USA, Canada, Mexico
use one phase 110V, We will change the voltage when you make a demand on it. First confirm
your locating and electron condition. Turn the power switch one the IC panel from position 0 to
position 1, Check whether the power supply light is in the status of connecting.
Connect the compressed air.
3)
Your printing plant must be have one set compressor to provide compress air to machine, Please enquire to our
sales Members, we will give you some advice on how to choose it. Please Check the display of the pressure gauge,
adjust the pressure to 4~5 Bar (the standard pressure).
东莞市高宝印刷机械科技有限公司
Dongguan KC Printing Machine Limited
Website: Http://www.dg-padprinter.com
Online contact
Skype: yingsuhuakelven QQ: 726986799
Email:
cjscbsf@126.com
SDA25x25 控制胶刮及回墨刮的上下升降
Controlling the action of rubber squeegee and ink blooding
MAL25X350 控制左右滑行的速度
Make the rubber squeegee move from left to right
调节回墨刮与网版的距离
Adjust the space between screen plate and ink blooding
调节胶刮与网版的距离
Adjust the space between screen plate and rubber squeegee
调节工作台前后位置
Adjust the front-back position of working table
锁紧工作台，保持精度
Lock the working table after adjust
调节工作台前后位置
Adjust the front-back position of working table
调节工作台左右位置
Adjust the right-left position of working table
固定产品印刷，有 T 字槽和吸气面板两种选择
Install Object to be printed.
;
13-18
13592766499@VIP.163.com
Advertisement
