Advertisement
Loose the screw and put down of squeegee combine nip, first push the rubber squeegee at the
beginning of printing design, fasten the setscrew at
the right side, then push the rubber squeegee to the other end till it can cover all printing design,
then fasten the screw of left stroke screw.
7)
Adjust the distance between screen frame and products.
Turning the handle wheel of machine at the back of machine to drop the screen frame. It is best
distance is 2-3mm when the screen frame press down. Adjust the height of rubber squeegee make it
contact with the surface of screen silk exactly.
8)
Adding ink and thinner.
Choose ink according to your
products. Pour them into screen
frame a long the direction of
rubber squeegee , start the
machine and make a one circle
run, check the printing quality,
Please adjust the pressure till clearly words
东莞市高宝印刷机械科技有限公司
Dongguan KC Printing Machine Limited
Website: Http://www.dg-padprinter.com
Online contact
Skype: yingsuhuakelven QQ: 726986799
Email:
cjscbsf@126.com
.
15-18
13592766499@VIP.163.com
2-3mm
Advertisement
