Basic Settings - Computherm Q5RF Operating Instructions Manual

Warning! Good quality alkaline batteries may only be used
for this appliance. Carbon-zinc batteries known as durable or long
life batteries and chargeable accumulators are not suitable for the
operation of this appliance. Icon appearing on the display to
indicate low battery voltage warns reliably that the batteries should
be replaced only when good quality alkaline batteries are used.
After the batteries have been inserted, the display flashes the
measured room temperature. (If this information fails to appear on
the display, press the „RESET" button located on the main panel of
the thermostat.

3. BASIC SETTINGS

After removing the rear panel of the de-
vice, the following factory default set-
tings can be modified by relocating the
jumpers (black plugs) and/or changing
the position of the orange-colored po-
tentiometer located on the main panel.
3.1 Selecting the Displayed Temperature
The temperature(s) to be shown on the display can be selected and set
by the left jumper.
- 7 -