Bay Networks Nautica 4000 Installation Manual page 5

Nautica modules
Hide thumbs Also See for Nautica 4000:
Table of Contents

Advertisement

s'il y en a, sont raccordés ensemble. Cette précaution est particulièrement importante dans
les régions rurales.
Avertissement: L'utilisateur ne doit pas tenter de faire ces raccordements lui-même; il
doit avoir recours à un service d'inspection des installations électriques, ou à un électricien,
selon le cas.
Avis: Veuillez prendre note que pour tout appareillage supportant des lignes de type
"loopstart," l'indice d'équivalence de la sonnerie (IES) assigné à chaque dispositif terminal
indique le nombre maximal de terminaux qui peuvent être raccordés à une interface. La
terminaison d'une interface téléphonique peut consister en une combinaison de quelques
dispositifs, à la seule condition que la somme d'indices d'équivalence de la sonnerie de tous
les dispositifs n'excède pas 5. Le REN figure sur l'étiquette "FCC Rules Part 68" située sur
le support du module ou à l'arrière de l'unité.
FCC Part 68 Compliance Statement
This equipment complies with Part 68 of FCC Rules. All direct connections to telephone
network lines must be made using standard plugs and jacks compliant with FCC Part 68.
Please note the following:
1.
You are required to request service from the telephone company before you connect
the unit to a network. When you request service, you must provide the telephone
company with the following data:
When you request T1 Service, you must provide the telephone company with
--
The Facility Interface Code
Provide the telephone company with all the codes below:
-
-
-
-
-
The telephone company will select the code it has available.
--
The Service Order Code(s) (SOC): 6.0Y
--
The required Universal Service Order Code (USOC) jack: RJ48C
When you request ISDN "U" Interface Service, you must provide the telephone
company with
--
The Facility Interface Code: 02IS5
--
The Service Order Code(s) (SOC): 6.0F
--
The required Universal Service Order Code (USOC) jack: RJ49C
When you request ISDN "S/T" Interface Service, you must provide the
telephone company with
--
The Service Order Code(s) (SOC): 6.0P
--
The make, model number, and FCC Registration number of the NT1
300275-D Rev. 00
04DU9-BN (1.544 MB, D4 framing format)
04DU9-DN (1.544 MB, D4 framing format with B8ZF coding)
04DU9-1KN (1.544 MB, ESF framing format)
04DU9-1SN (1.544 MB, ESF framing format with B8ZF coding)
04DU9-1ZN (1.544 MB, ANSI ESF and ZBTSI without line power)
v

Advertisement

Table of Contents
loading

Table of Contents