Table of Contents
Advertisement
MBS-1P Installation
®
Wabash MBS-1P ABS Introduction
The Wabash MBS-1P ABS enhances the original MBS-1 system by adding
Power Line Carrier (PLC) and expanding the number of configuration options.
The system can be configured with either two or four sensors and either one
or two pneumatic control modules. The Antilock Control Module (ACM) is
separate from the service brake relay valve, eliminating costly repairs
associated with relay valve failure. The choice of service brake relay can be
separate from choice of ABS. This is also an advantage when troubleshooting
the brake system.
1
Advertisement
Table of Contents
