NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (600 mm Width)
1. H should be determined onsite.
2. Angle, square, or channel steel with a width of 50 mm and a thickness of 4–5
mm is recommended.
3. Install shock pads between the base and the unit. The shock pads should be
made of EPDM rubber and 5 mm thick.
4. Control welding errors during the manufacturing process. If welding errors are
large, the base will be unusable after welding.
Issue 04 (2022-11-25)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
B Base Drawings
168