Dell Inspiron 15 3530 Owner's Manual page 102

3. Remove the memory module.
4. Remove the M.2 2230 solid-state drive
5. Remove the wireless card.
6. Remove the heat sink
NOTE: When removing the system board to replace/access other parts, the system board can be removed with the
heat sink/system board thermal plate attached to it in order to simplify the procedure and preserve the thermal bond
between the system board and heat sink/system board thermal plate.
About this task
The following image indicates the connectors on your system board.
1. I/O daughter-board FFC connector
2. Wireless card connector
3. Memory module connector
4. eDP connector
5. Power-adapter port connector
6. Keyboard FFC connector
7. Keyboard-backlight FPC connector
8. Battery connector
9. Touchpad FFC connector
10. Fan cable connector
11. Speaker cable connector
12. M.2 solid-state drive connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
102 Removing and installing Field Replaceable Units (FRUs)
or the M.2 2280 solid-state
or the system board thermal
drive, whichever applicable.
plate, whichever applicable.