Dell Inspiron 15 3530 Owner's Manual page 92

4. Lift the bottom side of the display panel and slide it downward to release the display brackets from the slots at the top side
of the display cover.
5. Gently flip the display panel assembly forward, peel back the tape that secures the display cable to the connector on the rear
of the display panel.
NOTE: Ensure that the panel has a clean and smooth surface to rest on, to prevent damage.
6. Disconnect the display cable from the connector on the display panel and remove the display panel.
NOTE: The display panel is assembled with the display brackets as a single service part. DO NOT pull the two pieces of
elastic tape and separate the brackets from the panel.
92 Removing and installing Field Replaceable Units (FRUs)