Resetting Units; Setting Token; Parameters (Setting Token) - Sanela SLZA 30 Instructions For Use Manual

8.4

Resetting units

Setting token

9.
9.1

Parameters (Setting token)

• After inserting the token into the charging station´s reading slot
and pressing the "Reset Units" button, all units will be removed from
the token to the status "Units remaining: 0".
• It does not affect the token's settings, it resets the counter.
• After resetting the units, the following information will appear
on the screen.
• Settings may be made by an account with the "Setup Token" permission.
• Used to set parameters for showers, door openers and 1f. devices
(for the first 20 minutes after powering up the end devices).
• Parameters can only be set by a user with permission
"User token - Settings.
• Confirmation OK. Cancel ESC.
28