Parameters; Clone Station Id; Brightness; Account Management - Sanela SLZA 30 Instructions For Use Manual

4.2

Parameters

4.2.1

Clone station ID

4.3

Brightness

4.4

Account Management

• Parameters can only be set by a user with "charging station setup"
permission or by a user with "administrator" permission.
• Sound - on/off
• Language - English / Czech, selection by arrows
• Automatic profile overwrite - automatically overwrites when confirmed,
the profile is updated automatically and it is not possible to create profiles.
• Industry - shows the extended menu for periodic charging in the token
parameters.
• Use of accounts (Administrator only) - on / off (see chapter 4.4).
• Password usage (Administrator only) - on/off, password for accounts.
• Confirmation OK. Cancel ESC.
• When using multiple SLZA 30 programming stations, it is possible
to clone the ID number.
• ID is used to link the charging station and the RFID device so that all devices
respond to the same token.
• Procedure:
- Create a pairing token in the first charging station (see chapter 10)
- insert the token into the second charging station
- press the "Clone station ID" button
• Adjust the brightness of the display using the sliding bar.
• Left minus, right plus.
• Confirmation OK. Cancel ESC.
• The settings can be made by an account with the
"Charging Station Settings - Account Management " permission.
• Up to 12 accounts can be created in Account Management
• Column No. 1 - switching off or on. Whether the account will be visible when
the charging station is switched on.
• Column No. 2 - Account name.
• Column No. 3 - Password (6-digit numeric code).
- The factory password setting for the administrator is "000000".
• Column No. 4 - Assign a group with permissions to the account.
(Use the up and down arrow to switch groups).
• Confirmation OK. Cancel ESC.
• Move between pages using arrow keys.
20