To Read Token; Charging Units (Credit) - Sanela SLZA 30 Instructions For Use Manual

8.2

To read token

8.3

Charging units (credit)

• After inserting the token into the charging station´s reading slot and pressing
the "Read Token" button.
• A window will pop up showing how many units are left, how many times
and where the token was used.
• After inserting the token into the charging station's reading slot and pressing
the "recharge units" button, the selected credit is loaded onto the token.
• It does not affect the token's settings, it charges units and adds them
to the units, that are already on the RFID token, resetting the counter.
• Once the token is reloaded, the following information will appear
on the screen.
27