About; Initial Full Systém Setup - Sanela SLZA 30 Instructions For Use Manual

4.8

About

Initial full system setup
5.
SLZA 30A SLZA 30AZ
SLZA 30B SLZA 30BZ
SLZA 31
SLZA 30C SLZA 30CZ
SLZA 32 SLZA 32T SLZA 35
• - Station ID, version of the factory program.
• All products you want to pair with the programming station must
be installed.
• The power must be turned off.
• Create a pairing token in the programming station (see chapter 10).
• You can also use the pairing token to set parameters.
• Switch on the power supply of the installed products.
22