Igmp Show Commands; Show Igmp Groups - Nortel Versalar 15000 Reference Manual

IGMP Show Commands

This section provides information on the IGMP (Internet Group Management
Protocol
describes the information in the tables the router displays.

show igmp groups

The
registered per interface on the router.
This command allows for the following options:
<interface_ip_address>
-i <interface_ip_address>
<interface_ip _address_
search_pattern>
-c <circuit_name>
-g <group_address>
The output includes the following information:
Group Address
Interface
Circuit
Life Time
308689-B Rev 00
show commands and the command options you can enter. It also
)
show igmp groups
command displays information about the IGMP groups
Displays IGMP interface information for the interface with
the specified IP address only.
Displays IGMP group information for the specified
interface only.
Displays information for the interface at the IP addresses
in the specified search criteria only.
Displays IGMP group information for the specified circuit
only.
Displays IGMP group information for the specified group
only.
IP address of the IGMP group.
The IP interface for this group.
Name of the circuit on which the IGMP group has
subscribed.
Amount of time until the group subscription times out.
show igmp groups
71