Troubleshooting; Cleaning And Maintenance; Disposal Of The Device - Eberg ETS 200 User Manual

EN ETS 200
TROUBLE SHOOTING
If the device does not turn on, follow the instruction below:
• Check that the heating panel is connected and the electrical outlet is working properly.
• Check the fuse of the building's/ flat's electrical network.
• If the device still does not work properly, contact an authorized service center to check and, if necessary,
repair the device.
ATTENTION! IF A PROBLEM OCCURS WITH THE DEVICE, UNDER NO CIRCUMSTANCES SHOULD YOU
DISMANTLE THE DEVICE OR ATTEMPT TO REPAIR YOURSELF. SUCH ACTIONS WILL VOID YOUR WARRANTY
AND MAY RESULT IN FIRE, ELECTRIC SHOCK, INJURY OR PROPERTY INJURY. IN THE EVENT OF MALFUNCTION
OF THE DEVICE, CONTACT AN AUTHORIZED SERVICE CENTER OR DISTRIBUTOR.

CLEANING AND MAINTENANCE

Always disconnect the appliance and let it completely cool before any maintenance. Use a vacuum cleaner
to remove dust on grilles. Clean the outside of the unit with a damp cloth. Never immerse the unit in water,
nor let water drip into the unit.
STORAGE
Always disconnect the appliance, let it completely cool and clean it before storing. If you do not use the
device for a long period, put back the unit and the instruction manual to the original carton and store
in a dry and ventilated place. Do not place any heavy items on top of carton during storing as this may
damage the appliance.

DISPOSAL OF THE DEVICE

INFORMATION REGARDING THE CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE
EUROPEAN DIRECTIVE 2012/19/EU
At the end of its working life, the device must not be disposed of with household waste. We
pay particular attention to the key role of the consumer in the recycling of this type of waste.
The device must be disposed of at a waste disposal center. Sorting waste such as old electrical
and electronic equipment prevents negative consequences for an environment and human
health which could result from improper disposal of such waste. Sorting such waste allows the materials
from which these devices are made to be recovered, resulting in significant energy and resource savings.
Such disposal requirements are marked with the label of the crossed waste container placed on the device.
+ KG+ ostatnia strona
13
www.eberg.eu