OPERATION AND STORAGE
• This crib is guaranteed to meet all federal and state standards and will
provide many years of service provided you adhere to the following
guidelines for assembly, maintenance and operation.
• Never aim or point a vaporizer or humidifier directly at the crib. The
water vapor will ruin the finish of the crib, as it would any other fine
piece of furniture.
• For parts or assistance, call Foundations
Adjusting Mattress Support:
1. Remove all Connector Bolts and Connector Nuts holding the Mattress
Support allowing Matress Support to rest on Stationary Side Bottom
Rails.
2. Standing on one side, lift Mattress Support vertically to desired height
position, insert Connector Bolts in End Panels, and secure with
Connector Nuts.
3.Walk around the crib to the opposite side and repeat step 2.
4. Securely tighten all Connector Bolts and Connector Nuts.
Disassembly and Storage:
1. Remove the crib mattress.
2. Follow the assembly instructions in reverse order, starting with Step 2.
3. Store your crib in a cool, dry place.
MAINTENANCE AND CLEANING
CAUTION: Periodically check the safety of your crib by making certain all
screws, nuts, and bolts are tightened securely. Call
Foundations
to replace any broken or missing parts. DO NOT
™
substitute parts.
• Your crib may be cleaned using a damp cloth with mild soap or a soft
dry cloth.
• Avoid using furniture polish or cleaning agents that may be hazardous
to children.
• To clean Clear or Mirror Panels, use mild dish soap, water, and a soft
cloth. Wipe the surface, applying only light pressure to remove grease
or oil. Do not use window-cleaning sprays, kitchen scouring
compounds or other chemicals.
• To remove fine scratches from Clear or Mirror Panels, hand polish with
a plastic scratch remover or compound cleaner.
• Replace teething rail if damaged, cracked or loose.
• If refinishing, use only non-toxic finish specified for children's products.
ONE YEAR LIMITED WARRANTY
Foundations
warrants this product to be free from all defects in material and
™
workmanship when used according to the manufacturer's instructions to the
original owner for a period of one year from date of purchase. The warranty
does not apply to damage caused by product alteration, normal wear and
tear, misuse or abuse of the product. Keep you sales receipt as a record of
the date of purchase. For replacement parts or warranty issues, please
contact Foundations
as we are better able to serve you. DO NOT return the
™
product to your retailer or distributor.
If you need assistance, call or write:
Foundations
, P.O. Box 1910, Medina, OH 44258-1910
™
Telephone 1-866-740-0195, Fax 1-330-721-6799
© 2003 Shamrock Industries, Inc.
.
™
Division of Shamrock Industries, Inc.
P.O. Box 1910
Medina, OH 44258-1910
1-866-740-0195
SI010C
Sheet 5 of 5
Need help?
Do you have a question about the SERENITY COMPACT STATIONARYSIDE CRIB and is the answer not in the manual?