Milwaukee M12 FUEL Operator's Manual

Milwaukee M12 FUEL Operator's Manual

Bandfile 13mm/10mm
Hide thumbs Also See for M12 FUEL:

Advertisement

Quick Links

OPERATOR'S MANUAL
Cat. No.
M12 FBFL13, M12 FBFL10
M12 FUEL™ BANDFILE 13MM
M12 FUEL™ BANDFILE 10MM
WARNING
To reduce the risk of injury, user must read and understand operator's manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M12 FUEL and is the answer not in the manual?

Questions and answers

Summary of Contents for Milwaukee M12 FUEL

  • Page 1 OPERATOR'S MANUAL Cat. No. M12 FBFL13, M12 FBFL10 M12 FUEL™ BANDFILE 13MM M12 FUEL™ BANDFILE 10MM WARNING To reduce the risk of injury, user must read and understand operator's manual.
  • Page 2 GENERAL POWER TOOL attached to a rotating part of the power tool may result in personal injury. SAFETY WARNINGS • Do not overreach. Keep proper footing and Read all safety warnings, instruc- WARNING balance at all times. This enables better control of the power tool in unexpected situations.
  • Page 3 MILWAUKEE Tool or a trained professional for ® environmentally compatible recycling additional information or training. facility. Maintain labels and nameplates. These carry • important information. If unreadable or missing, contact a MILWAUKEE service facility for a ® replacement.
  • Page 4 FUNCTIONAL DESCRIPTION Installing/Removing Belts 1. Remove battery pack. Loosen the belt guard by turning the thumbscrew anticlockwise, and rotate the guard out of the way. l i t safety latch clicks into the locking position. 9. Speed indicator 1. Sanding belt 10.
  • Page 5 8. Rotate the belt guard back into position, and turn l l a g i l the thumbscrew clockwise. contact wheel. o i t Installing/Changing the Contact Wheel tighten the thumbscrew. 1. Remove battery pack. 3. Push the arm against a hard surface until the 2.
  • Page 6 Abrasive materials are graded by coarseness. Start Transporting and Storage Position work with an abrasive grit just coarse enough to remove high spots and excessive roughness. Follow with a second sanding using a grit one or two grades marks made by the coarse grit abrasive. Use the Adjusting when the belt drifts left: 1.
  • Page 7 Return the tool, battery pack, and charger to a MILWAUKEE ® service facility for repair. After six months to one year, depending on...
  • Page 8 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...

This manual is also suitable for:

M12 fbfl13M12 fbfl10

Table of Contents