Milwaukee M12 Quick Start Manual

M12™ UNDERCARRIAGE
LIGHT
Cat. No.: M12 UCL
IMPORTANT SAFETY INSTRUCTIONS
READ
WARNING
INSTRUCTIONS
tric appliances, basic precautions should always
be followed, including the following:
• Before using, read this operator's manual, your battery
pack and charger operator's manual, and all labels on
the battery pack, charger and light. Learn your light's
applications and limitations as well as potential hazards
associated with this type of tool.
• Read and understand all the instructions before using
the appliance.
• To reduce the risk of injury, close supervision is nec-
essary when an appliance is used near children.
• Store idle light out of reach of children. Warm lights
can become hazardous in the hands of children.
• Do not store light by the magnetic storage tray.
•
Remove light from undercarriage before operating a
vehicle. A light left attached to the undercarriage may
break free which could result in personal injury.
• Store indoors. Do not expose to rain.
• Batteries must be recharged only with the charger
when used with another battery.
pack.
• When battery pack is not in use, keep it away from met-
al objects like: paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connec-
tion from one terminal to another. Shorting the battery
•
Maintain labels and
important information. If unreadable or missing, contact a
service facility for a replacement.
MILWAUKEE
®
SAVE THESE INSTRUCTIONS
FUNCTIONAL DESCRIPTION
1
2
3
1. Fuel gauge
2. Mode button
3. Power button
4. Light head
5. Light head handle
6. Magnetic storage
tray
7. Magnetic base
8. Battery bay
AND UNDERST AND
. When using
A charger that may be
nameplates. These
4
6
7
ADDITIONAL BATTERY SAFETY RULES
WARNING
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach
ALL
or bleach-containing products, etc., can cause a
elec -
short circuit.
WARNING
V
Volts
Direct Current
Read Operator's Manual
Magnet
Pinch Hazard - Keep hands out of pinch zone
Class III protection
Do not stare at light source.
The product was only suitable for indoor
use. Never expose the product to rain.
Regulatory Compliance Mark (RCM). This
product
requirements.
carry
Do not dispose of electric tools together
with household waste material. Electric
tools and electronic equipment that have
reached the end of their life must be
collected separately and returned to an
environmentally
facility.
Cat. No. ................................................................ M12 UCL
Light Output
High ............................................. 1,200 Lumens
Medium ........................................... 800 Lumens
5
Low ................................................. 600 Lumens
Battery Type .................................................... M12™
Charger Type ................................................... M12™
DC Input Volts...................................................... 12V
Max DC Input Amps............................................ 0.8A
Recommended Ambient
Operating Temperature ............... -17°C to 51°C
WARNING
charging instructions, read the operator's manual
supplied with your charger and battery.
8
Inserting/Removing the Battery
To remove the battery, push in the release buttons and
pull the battery pack away from the tool.
WARNING
To insert the battery, slide the pack into the body of the
tool. Make sure it latches securely into place.
To reduce the risk of fire, personal
injury, and product damage due to
Do not charge non-rechargeable
batteries.
SYMBOLOGY
meets applicable
compatible
SPECIFICATIONS
ASSEMBLY
Recharge o nly with the charg
ified for the battery
Always remove the battery pack any
time the tool is not in use.
regulatory
recycling
er spec-
. For specific