Electrical Wiring Work - Daikin FDKR200AV16 Installation Manual

I 6. ELECTRICAL WIRING WORK
IMPORTANT: * These values are for information only, they should be checked and selected to comply with the
local and/or national codes and regulations. They are also subjected to the type of installation
and size of conductors.
** The appropriate voltage range should be checked with data label on the unit.
Indoor unit
Model
Outdoor unit
Indoor unit
Voltage Range **
Outdoor unit
Power supply cable size*
No. of Conductors
Interconnection cable size* mm
No. of Conductors
Recommended fuse* A
FDKR200AV16 - RZR200AY16
FDKR300AV16 - RZR300AY16
FDKR400AV16 - RZR400AY16
3-Ph Power Supply Cable
OVERALL CHECKING
Ensure the following, in particular:-
1. The unit is mounted solidly and rigid in position.
2. Piping and connections are leak proof after charging.
3. Proper wiring has been done (see fig below).
Drainage check:- Pour some water into left side of drain
pan (drainage are in right side of unit).
• Test run:
1. Conduct a test run after water drainage test and gas
leakage test.
Indoor Unit Field Wiring Instruction:
FDKR200AV16 FDKR300AV16
RZR200AY16 RZR300AY16
230V/1 Ph/50Hz/@
415V/3Ph/50Hz/@
mm 2
2.5
5.0
2
1.0
7.0
20
s
R T
e
e e
FIELD WIRE
0
FDKR400AV16
RZR400AY16
4.0 6.0
5.0 5.0
1.0 1.5
7.0 7.0
32
40
N 1 2 3
e e e
e
'
,Ir
,Ir
3
1 2 4
e e
e
Indoor Unit Terminal
2. Watch out for the following:-
a) Is the electric plug firmly inserted into the
socket?
b} Is there any abnormal sound from unit?
c) Is there smooth drainage of water?
• Check that:
1. Condenser fan is running, with warm air blowing off
the condensing unit.
2. Evaporator blower is running and discharge cool air.
3. The remote controller incorporates a 3 minute delay
in the circuit. Thus, it requires about 3 minutes before
the outdoor condensing unit can start up.
cm,
cm,
11
4 5
6
Outdoor Unit
e e e
Terminal
l
1
5
6
e
e e
+
From
Outdoor Unit
FIELD WIRE
D □
□
D
□
@I e
DD
:0:
0