Other Lights On The Vehicle; Replacing Battery - Subaru Outback 2016 Manual

Hide thumbs Also See for Outback 2016:
Table of Contents

Advertisement

4. Remove the lens by prying the tab of
the lens with a flat-head screwdriver.
5. Pull out the bulb.
6. Install a new bulb.
7. Reinstall the lens.
8. Reconnect the electrical connector.
9. Reinstall the trunk light assembly.
& Other lights on the vehicle
It may be difficult to replace the bulbs
of other lights on the vehicle. We
recommend that you have the bulbs
replaced by your SUBARU dealer if
necessary.
Maintenance and service/Replacing battery

Replacing battery

The access key / transmitter battery may
be discharged under the following condi-
tions.
. The operation of the keyless access
function is unstable
. The operating distance of the remote
keyless entry system is unstable
. The transmitter does not operate prop-
erly when used within the standard dis-
tance
Replace the battery with a new one.
CAUTION
. Do not let dust, oil or water get on
or in the access key/transmitter
when replacing battery.
. Be careful not to touch or da-
mage the printed circuit board in
the access key/transmitter when
replacing the battery.
. Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
. Danger of explosion if battery is
incorrectly replaced. Replace
only with the same or equivalent
11-61
– CONTINUED –

Advertisement

Table of Contents
loading

Table of Contents