Back-Up Light (Outback); Rear Fog Light (Outback) - Subaru Outback 2016 Manual

Hide thumbs Also See for Outback 2016:

Table of Contents

& Back-up light (Outback)

1. Apply a flat-head screwdriver to the

light cover as shown in the illustration, and

pry the light cover off from the rear gate

2. Turn the bulb socket counterclockwise

and remove it.

3. Pull the bulb out of the bulb socket and

replace it with a new one.

4. Install the bulb socket by turning it

5. Install the light cover on the rear gate.

& Rear fog light (Outback)

It may be difficult to replace the bulb.

We recommend that you have the bulb

replaced by your SUBARU dealer if

Maintenance and service/Replacing bulbs

1. Remove the bulb cover inside the rear

bumper by removing the screw.

2. Turn the bulb socket counterclockwise

and remove it.

– CONTINUED –

Chapters

Table of Contents