18
Press and hold the SET button. Release when LEARN? is
displayed on the screen. READY will then be displayed.
See page 11 and 12 for detailed information on the
learning/cloning function.
Power requirement
Power is supplied from KP4.6 with the ribbon cable (incl.).
Troubleshooting
Should the keypad be locked in ERROR due to power inter-
ruption or other reason during cloning, proceed as follow:
1. Unplug power to the system and plug back in after 1 min.
2. When power resumes keypad displays distorted text.
3. Clone the LRC4.6 to the LKP4.6 without entering LEARN?
4. When LRC4.6 is done SENDING, repeat point 1 above.
Note: Time and date will not be updated in the LKP4.6.
Learn Function
Specifications
24 V DC @ 150 mA max