Other Icons/Menu Items - Audi EGRET PRO User Manual

Menu items
SET1: PIN lock on/off
SET2: Change PIN
SET3: km/h or mph
SET4: Bluetooth pairing
SET5: Bluetooth on/off
SET6: Display brightness
SET7: Pedestrian mode
To activate the PIN lock, press the "Plus" or "Minus" button.
Press the "Plus" or "Minus" button to activate change mode.
The numbers can be changed in the same way as when you
started your kick scooter for the first time (see page 31).
To switch between km/h and mph, press the "Plus" or "Minus"
button.
To activate Bluetooth pairing, press the "Plus" or "Minus" button.
Pairing remains active for five minutes.
Please note: Bluetooth pairing mode deactivates when you exit
the settings menu.
Factory setting: The Bluetooth interface is active.
Press the "Plus" or "Minus" button to switch off Bluetooth.
When the light is switched off, the brightness is set to 100%
as standard. If you switch on the light, the brightness of the
display dims automatically. In the menu, you can adjust the dim-
ming setting for the display. Press the "Plus" button to increase
display brightness and the "Minus" button to decrease display
brightness.
Please note: The light must be activated before the setting is
changed. This is the only way to see the brightness level set.
The scooter has a pedestrian mode. Activate the mode to allow
the scooter to operate at walking speed. Press the "Plus" or
"Minus" button to exit pedestrian mode.
83