Audi EGRET PRO User Manual page 53

Electric kick scooter
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 48
WARNING
3. After the first 50 km, check again that all bolted connections – especially on the folding
mechanism and wheel axles – are firmly seated and tighten as necessary. Loose bolted con-
nections can lead to functional failure and serious accidents.
WARNING
4. Carrying out maintenance work
• Before carrying out any maintenance or cleaning work on the kick scooter, the
scooter must be switched off and disconnected from the power supply unit. Oth-
erwise, there is a risk of electric shock.
• Never direct a powerful jet of water (e.g. a high-pressure cleaner) directly onto
the kick scooter. Water can enter the components and damage the electronics in
this way. Water in the battery housing can cause electric shock. Instead, clean the
kick scooter with a damp cloth.
• Children must not play with the kick scooter or its components and children
must not carry out any cleaning or maintenance work in this regard.
WARNING
5. Keep the packaging (plastic and cardboard) away from children. Children could swallow
these materials or parts of them and suffocate.
WARNING
6. The following points may affect riding safety and may lead to falls and accidents in the
event of non-compliance:
• Do NOT place your feet on the rear guard.
• Do NOT ride the scooter with only one foot.
• Avoid the tyres/wheels from coming into contact with any obstacles.
• Mind your head when riding through doorways.
• Do not ride faster than 5 to 10 km/h over raised edges, bumps, uneven roads or
any other uneven surfaces. Bend your knees to better adapt to the above surfaces.
• Do NOT take your hands off the handlebar when riding.
• Do NOT ride with one hand.
53

Advertisement

Table of Contents
loading

Related Products for Audi EGRET PRO

Table of Contents