Winterizing - Acuva ArrowMAX HOME User Manual

10. POST-INSTALLATION & MAINTENANCE
(CONT.)

10.2 Winterizing

HOW TO WINTERIZE YOUR UV-LED WATER TREATMENT SYSTEM:
1) Remove the Pre-Filter
Remove the pre-filter from the system and set it on its end (outlet-down) to drain. Place the
filter in a bag and store it in a refrigerator or a cool environment until it's time to flush and
use it again.
2) Option A. Apply Compressed Air
Apply compressed air to the inlet of your unit to blow out any and all water trapped in the
system as well as any accessories such as flow restrictors or faucets you may have. Repeat
this a few times to ensure no water is left in the lines.
Option B. Remove and Store Away
If you do not have access to compressed air, remove the system and flow restrictor (if
present) and store in a temperature-controlled environment (>4°C) until ready to re-install.
Note: Simply draining your water system may not be effective at removing enough water to
prevent damage inside the device.
Table 8: Warning for Winterizing
• Failure to properly winterize the ArrowMAX
temperatures can lead to damage and water leakage.
• Failure to winterize can result in damage to the system which is not covered by warranty,
so please take care to winterize well before freezing temperatures or inclement weather
may occur.
• Visit Acuva's FAQ page for support.
WARNING
HOME before it is exposed to freezing
TM
ArrowMAX HOME User's Manual_EN 23
TM