Installation Guide; System Configuration - Acuva ArrowMAX HOME User Manual

6. INSTALLATION GUIDE

It is required that a licensed plumber or certified technician carry out the
installation. Acuva is not liable for consequential or incidental damages due to
improper installation.

6.1 System Configuration

Figure 2 shows the installation of a typical ArrowMAX
components that may be used for the installation. The use of a bypass assembly
is recommended in case the system requires "off-line" maintenance. In this case,
it requires a supplementary disinfectant for the distribution system if any water is
used during the by-pass condition. For details, please refer to section 10.1 water
treatment system. (See Page 22.)
Figure 2: ArrowMAX
• The UV system is intended for indoor use only, do not install a UV system
where it may be exposed to the weather.
• Install the UV system on the cold water line only, before any branched lines.
• Installation must comply with existing state and local plumbing codes and
regulations.
HOME Water Treatment System
TM
HOME and the related
TM
ArrowMAX HOME User's Manual_EN 11
TM