Page 1
ASSEMBLY INSTRUCTION ITEM#: GHP22090 SKU#: 810584310 Made in China 10 INCH STEEL ROUND TABLEFIRE, 1 lb LP Need help? We are here for you! 1(877)447 – 4768 M-F, 8am - 4:30 pm CST • Toll Free...
Page 2
WARNINGS WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or loss of life. DANGER FIRE OR EXPLOSION HAZARD If you smell gas: • Shut off gas to the appliance. •...
SAFETY INFORMATION Before you assemble or operate this unit, please carefully read this entire manual. Failure to do so may result in a fire, explosion, injury or death. • The installation of this unit must adhere to local codes • Keep a safe distance to avoid burning skin or clothing.
Page 4
SAFETY INFORMATION • The gas supply tank should be constructed and marked IF APPLICABLE: with the specifications for the LP gas tanks of the U.S. • Allow heating item to cool completely before placing on Department of Transportation or the National Standard lid. of Canada CAN/CSA-B339, LP gas tanks, spheres and •...
PARTS LIST M4 Screw Wing Screw x1 Guard (preassembled) x1 Burner (preassembled) x1 Body x1 Control Knob (preassembled) x1 Fixing Plate (preassembled) Angle Bracket Fixing Nut (preassembled) Tank Bracket x1bag Lava Rocks...
Page 6
STEP 1 Unscrew and remove the fixing nut (F) from the threaded post.
Page 7
STEP 2 Attach the tank bracket (G) to angle bracket (E) using 2 M4 screws (AA) .
Page 8
STEP 3 Insert the body (B) through the umbrella hole in the table and the tank bracket assembly made in step 2. Screw the fixing nut (F) to the body (B) from the underside of the table to secure the body to the table.
Page 9
STEP 4 Check that the control knob (C ) for the gas supply system is turned to the “OFF” position before assembling the 1 lb. propane gas tank. . To attach the 1 lb. propane gas tank (not included) on the unit, screw the 1 lb. gas tank to the regulator inlet fitting.
Page 10
STEP 5 Once the tank is attached to the regulator, Insert the wing screw (BB) into the tank bracket and turn clockwise to secure the propane gas tank tightly. Danger Be cautious not to kick, jam or jar propane tank...
Page 11
STEP 6 Pour the Lava rocks (I) into the middle of the firebowl body (B) evenly. x1 bag WARNING To ensure proper function, the guard (A) on the burner should be free of lava rocks (I) at all times. Keep away from the unit and have the unit to burn Always ensure that lava rocks/pumice stones/ LavaGlass are completely dry before use.
OPERATION Before performing a leak test, be sure that no sparks can occur and you are in a spacious outdoor area. Con- nect the propane gas tank to the regulator and turn the valve on the unit to the ‘OFF’ position. Brush a soap and water mixture on all connections.
TROUBLESHOOTING CAUSE SOLUTION No gas flow Check that the gas tank isn’t empty Regulator isn’t connected secure- Tighten regulator connection to the ly to the tank gas tank Spider webs or insect nest in the Check the burner and guard Burner won’t light while burner and guard using a match...
MAINTENANCE • Before performing any maintenance always disconnect propane gas tank. • Store your product indoors during winter months. Avoiding extreme cold temperatures will prevent from exposure damage. • Keep the heating item free and clear from combustible materials. • Visually inspect burner for obstructions and keep tank enclosure free and clear from debris. •...
WARRANTY This product has a one-year warranty against manufacturing defects in workmanship, or materials. The manufacturer warranty will be voided by, and manufacturer disclaims any responsibility for, the following actions: • Modifcation of the unit and/or components including the gas valve assembly. •...
Need help?
Do you have a question about the GHP22090 and is the answer not in the manual?
Questions and answers