Nokia N92 User Manual page 107

Nokia n92: user guide
Hide thumbs Also See for N92:
Table of Contents

Advertisement

Display
Brightness—Adjust the basic brightness level of the display
to lighter or darker. However, in extreme light conditions,
the brightness of the display is automatically adjusted.
Power saver
time-out—Select the time-out period after
which the power saver is activated.
Light
time-out—Select a time-out after which the
backlight of the display is switched off.
Call
Send my caller
ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your network
operator or service provider when you make a subscription
(Set by
network) (network service).
Call
waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function
is activated
(Check
status).
Reject call with
SMS—Select
to a caller informing why you could not answer the call.
See 'Answer or decline a call', p. 61.
Yes
to send a text message
Message
text—Write a text to be sent in a text message
when you reject a call.
Image in video
call—If video is not sent during a video
call, you can select a still image to be displayed instead.
Automatic
redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press
.
Summary after
call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Speed
dialling—Select On, and the numbers assigned to
the speed dialing keys (
pressing and holding the key. See also 'Speed dial a phone
number', p. 59.
Anykey
answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
,
,
, and
.
Line in
use—This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select
and have not subscribed to this network
Line 2
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Copyright © 2006 Nokia. All rights reserved.
-
) can be dialed by
107

Advertisement

Table of Contents
loading

This manual is also suitable for:

N92-1Rm-100

Table of Contents